Test with a multimeter

Cement (power) resistor

Explore in Atlas

Now: Measure the resistance

CircuVanta 6000 counts · auto range DCAUTO•)))HOLDFUSE− HOLD LIGHT OFFV⎓V~Ω•)))FmA⎓ mA400 mACOMVΩ Pin 1 1 Pin 2 2
Pin 1: Pin 1 (1) Pin 2: Pin 2 (2)

Red probe Not connectedBlack probe Not connected

Hold the probe and drag it to the tip of a leg. Tapping works too: first pick the probe, then the leg.

Set the range to Ω (resistance).

Measure step by step

Remove the part from the circuit or lift at least one of its legs. If you measure it in the circuit, parallel parts change the reading. Cement resistors get very hot while working; wait for them to cool.

  1. 1Measure the resistance