Learn

See the current. Build the circuit. Learn by measuring.

You plug real parts into the breadboard, watch the path of the current live and measure with the multimeter. Step-by-step lessons are not out yet; for now you can start from one of the three paths below.

Build a circuit in the Lab Browse the parts
Atlas Explore the parts Open up every part; look at its leads, its symbol and the most common mistake. 65 part typesOpen the Atlas Lab Build a circuit Plug parts into the breadboard, switch on the power; see current and voltage live and measure with the multimeter. 0 saved circuitsOpen the Lab Build from schematic Build from the schematic Build a ready-made circuit schematic on the breadboard, confirm it with Check; if you get stuck, take a hint. 0 / 43 task doneStart
MeasurementMeasure a part with the multimeterTouch the probes to the leads and decide whether it is good or faulty. 0 / 65 part measured Measure

You have no saved progress yet. Your progress is stored on this device; no account needed.