Test with a multimeter
Thermistor (NTC/PTC)
Now: Resistor value at room temperature
Pin 1: Pin 1 (1) Pin 2: Pin 2 (2)
Red probe Not connectedBlack probe Not connected
LED litHold the probe and drag it to the tip of a leg. Tapping works too: first pick the probe, then the leg.
· beep
Set the range to Ω (resistance).
Measurement taken while pressed is saved. You can go to the next step.
Measure step by step
The resistance of an NTC thermistor drops as it heats up; it has no direction. First measure it at room temperature, then hold it between your fingers to warm it and watch the drop.
- 1Resistance at room temperature
- 2Warm it with your finger